Bird Bath Seedhead, 2436
This sweet little bird bath is the perfect size. Large enough to be attractive to birds and small enough to be mounted on a 1/4 inch / 0.64 cm metal rod. Overall height is 15 cm, with a bowl that is 15.5 cm across, with a depth of 2.5 cm..
This handmade item started as a lump of clay and was thrown on a potters wheel. The bowl has been decorated with studio made coloured slips and clear glaze, while the outside has stamped decoration and studio made calcium glaze. It is then fired to vitrification at 1280 C. The colour will not fade or be washed away.
We have some of these baths in our garden and love to watch song birds splashing around or taking a drink. We even had a crow washing and breaking up a bagel before flying away with pieces.
Each item is individually made and may vary slightly in size and colour. Price is per each.
Rod is included with pick-up orders only.
Ceramic Care
Protect from impact. Bringing it inside in winter is recommended in areas of heavy snowfall or deep frost, due to possiblity of impact related accidents!
Insert your chosen support into the ground before adding the piece (please do not use the pottery to push down on the support!).
Mounting Tips for bird baths
This bird bath will accommodate a 1/4 inch / 0.64 cm metal rod. The rod should firmly seated in the ground before adding the pottery. Please do not use the pottery to push on the rod as the ceramic may crack.
In the centre of the underside of the bowl (inside the piece) there is a ring which forms a divot for the rod to slot into, which will keep the piece upright once installed. The hole in the base is made slightly larger than it needs to be to compensate for shrinkage and possible warping in the kiln. If you find that the piece moves around too much, a bit of tape around the rod just inside the base will make it nice and snug.